Outdoor Lighting
Synge Lantern
The synge lantern is a four sided lantern, manufactured from copper or brass or a combination of both.
This lantern is available in three different sizes – 9”, 12” or 16”. It has endless applications from shopping malls, hotels, pubs, garden lightening and wall mounted lighting. The lantern is hand crafted and polished to a mirror finish.
The lantern is hand-crafted and is polished to a mirror finish, and is then is fineshed with coats of two pack polyurethane lacquer.
The lantern is mounted on either a pole or a wall-bracket by means of a frog-leg bracket, which is manufactured to suit your application.
Glazing:
The lantern is fitted as standard with clear glass. The glass in then bonded by means of a double –sided adhesive rubber. Personalised features such as stained glass such as stained glass, family crests and company logos can be engraved if requested. Polycarbonate or Perspex can also be fitted.
Electrical:
The lantern is fitted with a B.C. Lampholder as standard. The lantern can be fitted with E.S., C.S or U.L. fittings if requested. A stainless steel reflector is fitted as standard.
This lantern is available in three different sizes – 9”, 12” or 16”. It has endless applications from shopping malls, hotels, pubs, garden lightening and wall mounted lighting. The lantern is hand crafted and polished to a mirror finish.
The lantern is hand-crafted and is polished to a mirror finish, and is then is fineshed with coats of two pack polyurethane lacquer.
The lantern is mounted on either a pole or a wall-bracket by means of a frog-leg bracket, which is manufactured to suit your application.
Glazing:
The lantern is fitted as standard with clear glass. The glass in then bonded by means of a double –sided adhesive rubber. Personalised features such as stained glass such as stained glass, family crests and company logos can be engraved if requested. Polycarbonate or Perspex can also be fitted.
Electrical:
The lantern is fitted with a B.C. Lampholder as standard. The lantern can be fitted with E.S., C.S or U.L. fittings if requested. A stainless steel reflector is fitted as standard.
Yeats Lantern
The yeats lantern is very similar to the 16” Synge Lantern, except it is manufactured as six sided lantern.
The Yeats lantern lends itself to projects involving pubs, shopping malls, hotels, garden lighting.
The lantern is hand crafted and is available in either copper or brass, and is polished to a mirror finish and then coated with two pack polyurethane lacquer.
The frog leg bracket are manufactured to suit the particular project application or existing applications.
Glazing:
The lantern is fitted as standard with clear glass. The glass in then bonded by means of a double –sided adhesive rubber. Personalised features such as stained glass, family crests and company logos can be engraved if requested. Polycarbonate or Perspex can also be fitted.
Electrical:
The lantern is fitted with a B.C. Lampholder as standard. The lantern can be fitted with E.S., C.S or U.L. fittings if requested. A stainless steel reflector is fitted as standard.
The Yeats lantern lends itself to projects involving pubs, shopping malls, hotels, garden lighting.
The lantern is hand crafted and is available in either copper or brass, and is polished to a mirror finish and then coated with two pack polyurethane lacquer.
The frog leg bracket are manufactured to suit the particular project application or existing applications.
Glazing:
The lantern is fitted as standard with clear glass. The glass in then bonded by means of a double –sided adhesive rubber. Personalised features such as stained glass, family crests and company logos can be engraved if requested. Polycarbonate or Perspex can also be fitted.
Electrical:
The lantern is fitted with a B.C. Lampholder as standard. The lantern can be fitted with E.S., C.S or U.L. fittings if requested. A stainless steel reflector is fitted as standard.
Castle lantern
The Castle Lantern seen here is named after Dublin Castle, which was built in medieval times. The lantern was designed and manufactured to be in keeping with the castle which was totally refurbished in the late 1980’s. The lanterns itself to park lighting, courtyard lighting and exclusive upmarket project.
Electrical:
The lantern is fitted with a B.C. Lampholder as standard. E.S., C.S or U.L. and SON lighting equipment can be fitted if requested.
Electrical:
The lantern is fitted with a B.C. Lampholder as standard. E.S., C.S or U.L. and SON lighting equipment can be fitted if requested.
Phoenix Lantern
The Phoenix Lantern pictured here is named after Europe’s largest city park – Dublin’s Phoenix Park. The lantern was design and manufactured for the main thoroughfare of the park. This fixture is available in either copper or brass and can be configured for gas or electric applications.
The Phoenix lantern lends itself to many applications such as landscape lighting, road and park lighting. The lantern is hand built and modifications can be made to suit specific applications.
The Phoenix lantern lends itself to many applications such as landscape lighting, road and park lighting. The lantern is hand built and modifications can be made to suit specific applications.
Phoenix Hexagonal Lantern
This lantern is identical to the 4-sided Phoenix Lantern, except it is manufactured with a six configuration.
Terrace Lantern
The terrace Lantern is handcrafted from either copper or brass. The lantern is designed to mount directly onto a wall. Nby means of a mounting bracket which is fitted to the rear of fixture.
Access to the lighting equipment or glass is achieved by means of removing the top half of the lantern for easy access. This ensures swift and trouble-free cleaning and maintenance of the lantern.
Glazing:
The lantern is fitted as standard with clear glass. The glass in then bonded by means of a double –sided adhesive rubber. Personalised features such as stained glass, family crests and company logos can be engraved if requested. Polycarbonate or Perspex can also be fitted.
Electrical:
Unless otherwise requested, the lantern is fitted with a standard twin-candelabra lampholder for screw-in lamps. B.S, C.S., E.S and U.L, fittings can be fitted if requested.
Access to the lighting equipment or glass is achieved by means of removing the top half of the lantern for easy access. This ensures swift and trouble-free cleaning and maintenance of the lantern.
Glazing:
The lantern is fitted as standard with clear glass. The glass in then bonded by means of a double –sided adhesive rubber. Personalised features such as stained glass, family crests and company logos can be engraved if requested. Polycarbonate or Perspex can also be fitted.
Electrical:
Unless otherwise requested, the lantern is fitted with a standard twin-candelabra lampholder for screw-in lamps. B.S, C.S., E.S and U.L, fittings can be fitted if requested.
Request a Callback
Clients
